User Guide - FUJIFILM
Last updated
Last updated
Fuji Camera models currently supported by Cam Linker: X100V, X100F, X100T, X-T200, X-T100, X-T30, X-T20, X-T10, X-T4, X-T3, X-T2, X- T1, X-Pro3, X-Pro2 X70, X30, X-A7, X-A5, X-A3, X-E4, X-E3, X-E2, X-H1, X-S10, X-A10, XF10 , XP90, FinePix S9900W, FinePix S1.
The first connection will be troublesome and requires 5 steps, and the subsequent connection will be very simple and only need 2 steps.
Before using, please make sure that Cam Linker has wireless data, geographic location, local network, and system album access permissions.
Click the [Playback] Button on the camera body > click the [Wireless Communication] Menu. Enter [the interface shown in Figure 1].
[Interface shown in Figure 1] in the camera, click the [MENU OK] button to change the APP. Enter [the interface shown in Figure 2].
This step is very important. Entering the [interface shown in Figure 2], the original change button in the lower left corner will become a help button.
In the APP click [Add new camera] button to add a camera by entering the Wi-Fi name. The Wi-Fi name is the string of characters starting with FUJIFILM in the camera(such as FUJIFILM-X-T10-BA63). Pay attention to capitalization and underscore, please don't get it wrong.
Click the camera connection button just added in the APP [Connect to the camera you added]. When clicking the connect button, the camera needs to be in the [interface shown in Figure 2]. If it times out, repeat steps 1.1 and 1.2
The [interface shown in Figure 3] will appear in the camera, click the [MENU OK] button on the camera body to confirm the authorization. Then it should be fine.
If there is a problem with the connection, such as being connected all the time. You can restart the camera and restart the APP (kill it and open it again), then try again.
Click the [Playback] Button on the camera body > click the [Wireless Communication] Menu. Enter [the interface shown in Figure 1].
Click the camera connection button you added in the APP [Connect to the camera you added].
If there is a problem with the connection, such as being connected all the time. You can restart the camera and restart the APP (kill it and open it again), then try again.
Check whether the camera is in the list of supported camera models.
Check whether the camera Wi-Fi transfer function is turned on.
Check whether the camera has completed the authorization of the APP. For the specific steps, see: Use steps (first time).
Check whether the Wi-Fi name configured in the APP is correct.
Check whether the APP has access wireless data, and geographic location permission, local network permission.
If the above can't solve it, you can restart the camera and restart the APP (kill it and open it again) and try again. You can also submit relevant information in APP-Settings-Feedback, and we will investigate and solve it.
It shows that the download is successful but cannot be found in the system album. Please check whether the Cam Linker APP has permission to access the system album.
About RAW: Due to the limitation of Fuji cameras, photos in RAW format are not in the list of photos returned by the camera (the same is true for the official APP). Therefore, photos in RAW format cannot be displayed in the APP. It is recommended to use the JPG+RAW mode to take pictures, so that you can use the APP to transfer the JPG format photos, and the RAW format photos are also stored in the card, which is convenient for subsequent editing on the computer.
About size: Fuji cameras will transmit compressed images (within 3M) by default. If you need to transfer the original image, click [Connection Settings Menu]>[Wireless Settings Menu]>[Image Size] in the camera and then turn it off.
Related permissions can be set by searching for Cam Linker in the system settings. As shown below:
